Replacing The Jaw Clutch - Invacare Bora Service Manual

SERVICE MANUAL
7.2.3

Replacing the jaw clutch

· Loosen the motor screw (1) with the 5 mm
Allen key.
· Remove the motor from the transmission.
· Remove the clutch (2) from the motor (1)
using the screwdriver
· Place a new clutch on the motor. Observe the
position of the groove (3) on the motor.
· The motor is reassembled in reverse order to
disassembly.
· Insert the motor carefully into the
transmission to avoid damage. Observe the
position of the groove (1) in the transmission.
· The cable must be routed so that it does not
rub or get trapped.
· Insert the motor plug into the electronics
module.
· Secure the motor cable with cable ties.
42
®
Invacare - Bora/Spectra XTR