7.2.2
Replacing the motor
•
Loosen the motor screw (1) with the 5 mm
Allen key.
•
Remove the motor from the transmission.
•
The motor is reassembled in reverse order
to disassembly.
•
The motor must be carefully inserted into the
transmission to avoid damage. Observe the
position of the groove (1) in the
transmission.
•
The cable must be routed so that it does not
rub or get trapped.
•
Insert the motor plug into the electronics
module.
•
Secure the motor cable to the frame with
cable ties.
7.2.3
Replacing the jaw clutch
•
Loosen the motor screw (1) with the 5 mm
Allen key.
•
Remove the motor from the transmission.