Clock Setting Function - Ducati Diavel Carbon ABS Owner's Manual

Hide thumbs Also See for Diavel Carbon ABS:
Table of Contents

Advertisement

Clock setting function

E
This function sets the clock.
To access the function it is necessary to view the "setting"
menu page 48, using button (1, fig. 14) "▲" or (2, fig. 14)
"▼" select the "CLOCK" function and press the reset button
(12, fig. 12) to confirm.
In the following screen the message "SETTING" is
highlighted in green (3, fig. 58); now, press the reset button
(12, fig. 12) for 3 seconds to edit the time displayed on the
dashboard on handlebar, and the "SETTING" indication
highlighting becomes grey (4, fig. 58).
Clock setting
On entering this mode, the message "AM" will flash;
if you press the button (2, fig. 14) "▼" "PM" flashes;
if you press the button (2, fig. 14) "▼" you will return to the
previous step (if it is 00:00, when switching between "AM"
to "PM", 12:00 will be displayed).
pressing button (1, fig. 14) "▲" accesses the hour setting
mode; the hours start to flash.
each time you press the button (2, fig. 14) "▼", the digit will
increase by 1 hour; if the button is held pressed down (2, fig.
14) "▼" the digit will increase by 1 hour every second (when
the button is held depressed, the hours do not flash).
pressing button (1, fig. 14) "▲" gives access to the minute
setting mode; minutes start to flash.
each time you press the button (2, fig. 14) "▼", the digit will
increase by 1 minute; holding down the button (2, fig. 14)
"▼", the digit will increase by 1 minute each second;
if the button is held depressed (2, fig. 14) "▼" for over 5
seconds, minutes will increase by 1 minute every 100 m
78
(while the button is held depressed (2, fig. 14) "▼", the
seconds will not flash).
If you press button (1, fig. 14) "▲" setting is completed and
the dashboard on tank display "SETTING" item is again
highlighted in green (5, fig. 58).
To exit, select "EXIT" and press the reset button (12, fig. 12).
Note
In case of a battery is cutoff, when the voltage is
restored and at the next Key-On, the clock is always reset (it
starts automatically from 00:00).

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents