Passenger grabhandle
Passenger grabhandle (1, fig. 111) is located inside the tail
guard; to take it out, remove the seat (see "Removal of the
seat" on page 121), pull the knob (2, fig. 111) while taking out
the grabhandle (1, fig. 111) from its housing until it is fully
extended.
Warning
Before use, pull back and forth to ensure that it is
locked in the correct position.
To withdraw it, pull knob (2, fig. 111), push grabhandle (1, fig.
111) in its housing until it is completely flush with the tail
guard (fig. 112) and refit the seat (see "Refitting the seat" on
page 123).
1
1
E
2
fig. 111
fig. 112
125