Clock Setting Function (Clock) - Ducati Scrambler Owner's Manual

Hide thumbs Also See for Scrambler:
Table of Contents

Advertisement

Clock setting function (CLOCK)

This function allows setting the clock.
To view this function, enter the Setting Menu, use
button (1) or (2) to select CLOCK and press button (4).
To access the setting function, keep button (2)
pressed for 3 seconds.
After 3 seconds it is possible to set the clock as
follows:
-
the "AM" indication starts flashing;
-
if you press button (2) the "PM" indication
starts flashing;
-
if you press button (1) you will return to the
previous step (if it is 00:00, when switching
between "AM" to "PM", 12:00 will be
displayed);
-
press button (4) to shift to hour setting, hours will
start flashing;
-
each time you press button (2), the digit will
increase by one hour. If you hold button (2)
down, the number increases cyclically in
steps of one hour every second (when the
button is held depressed, the hours do not
flash);
-
pressing button (4) gives access to the minute
setting mode; minutes start to flash;
-
each time you press button (2), the digit will
increase by 1 minute. If you hold button (2)
pressed, the count increases cyclically in
steps of 1 minute every second;
-
if button (2) is kept pressed for more than 5
seconds, steps increase in steps of 1 every
100 ms (seconds will not flash while button
(2) is pressed).
71

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scrambler 400

Table of Contents