Replacing The High And Low Beam Bulbs; Headlight - Ducati Diavel Carbon ABS Owner's Manual

Replacing the high and low beam bulbs

Before replacing a burnt-out bulb, make sure that the new
bulb complies with the voltage and wattage specified in the
"Wiring diagram", page 182. Always test the new bulb
before refitting any parts you have removed.
fig. 154 shows the locations of the low beam bulbs (LO), high
beam bulbs (HI) and the parking light bulb (1).

Headlight

Important
Have the high and low beam bulbs replaced by a Ducati
Dealer or an authorised Service Centre.
Warning
The headlight might fog up if the vehicle is used under
the rain or after washing.
Switch headlight on for a short time to dry up any
condensate.
LO
HI
E
1
fig. 154
161