Checking Brake Pads For Wear - Ducati Diavel Carbon ABS Owner's Manual

Checking brake pads for wear

E
fig. 136)
Check brake pads wear through the inspection hole in the
callipers.
Change both pads if friction material thickness of even just
one pad is about 1 mm.
Warning
Friction material wear beyond this limit would lead to
metal support contact with the brake disc thus
compromising braking efficiency, disc integrity and rider
safety.
Important
Have the brake pads replaced at a Ducati Dealer or
authorised Service Centre.
148
(fig. 135 and
MIN
fig. 135
MIN
fig. 136