Changing The Type Of Ink - Roland FJ-500 User Manual

3-4 Changing the Type of Ink

When changing the type of ink in use, follow the steps below to
replace the ink.
Ink replacement requires four optionally available cleaning
cartridges.
The amount of cleaning fluid used varies according to the area
cleaned.
1
Press the [MENU] key and [
following screen appear on the display.
2 Press the [ ] key to make the following screen
appear on the display.
3
Use the [ ] key to select [CHANGE INK SET], then
press the [ ] key.
4
Use the [ ] and [
to use, then press the [ENTER] key.
* When you are changing from [PIG. 8] (eight-color
pigment ink) to something else, turn over the
plates for the ink-cartridge ports. For more
information, refer to "2-1 Installing Ink Cartridges"
-- "Before You Install the Ink Cartridges" and "Turn
Over the Plate."
- PIG. 8: Pigmented ink (orange, green, light cyan, light
magenta, black, cyan, magenta, and yellow)
- PIG. 4: Pigmenedt ink (black, cyan, magenta, and yellow -
two sets)
- DYE 4: Dye-based ink (black, cyan, magenta, and yellow -
two sets)
- PIG&DYE: Dye-based ink (black, cyan, magenta, and yellow)
and pigmented ink (black, cyan, magenta, and yellow)
You can perform
cleaning seven times
per cleaning cartridge.
] key to make the
] keys to select the new type of ink
You can perform cleaning four times
per cleaning cartridge.
* Due to the structure of the head,
twice as much cleaning fluid is
consumed as for other areas.
INK CONTROL
EMPTY MODE
INK CONTROL
CHANGE INK SET
CHANGE INK SET
PIG. 8 DYE 4
3 Maintenance
MENU
INK CONTROL
55