If Drop-Out Persists Even After Carrying Out Cleaning Several Times - Roland FJ-500 User Manual

1
Press the [CLEANING] key, then press the [
display the screen shown in the figure. Press the
[ENTER] key to start head cleaning.
You can choose to perform cleaning of only the right
head or only the left head by pressing the [
times.
Press the [ENTER] key to start head cleaning.
2
When head cleaning ends, press the [
the screen shown in the figure. Press the [ENTER] key
to start the printing test.
Refer to "2-4 Test Printing" and check the printing-
3
test results.
If a problem is found, repeat the cleaning.
If Drop-out Persists Even After Carrying Out Cleaning
Several Times
1
Press the [MENU] key and [
following screen appear on the display.
2
Press the [ ] key and the [
screen shown in the figure.
You can choose to perform cleaning of only the right head
or only the left head by pressing the [
Press the [ENTER] key to start head cleaning
("medium").
3 When head cleaning ends, press the [
the screen shown in the figure. Press the [ENTER] key
to start the printing test.
4 Refer to "2-4 Test Printing" and check the printing-test
results.
If a problem is found, repeat the cleaning.
If dot drop-out persists even after carrying out cleaning
5
("medium") several times, press the [
] key to display the screen shown in the figure.
You can choose to perform cleaning of only the right
head or only the left head by pressing the [
times.
Press the [ENTER] key to start head cleaning
("powerful").
When head cleaning finishes, perform a printing test to
6
check the results.
] key to
] key more
] key to display
] key to make the
] key to display the
] key more times.
] key to display
] key and the [
] key more
CLEANING
BOTH HEADS
CLEANING
TEST PRINT
MENU
HEAD CLEANING
HEAD CLEANING
BOTH MEDIUM
HEAD CLEANING
TEST PRINT
HEAD CLEANING
BOTH POWERFUL
3 Maintenance
43