Roland FJ-500 User Manual page 50

3 Maintenance
NOTICE
Do not touch the ink nozzle (at the bottom area of the head).
Wipe only the silver-colored metal area.
There is no need to apply force when wiping. You can remove dust by simply stroking the surface.
Do not use a soiled cleaning stick.
Use lint-free tissue or the like to remove grime adhering to a cleaning stick. Also, if a cleaning stick becomes
extremely dirty, discard it and perform cleaning with a new one.
9
Move the carriage to a location where the cleaning stick reaches the right-hand side surface of the left-hand head, and wipe away
any grime on the right-hand side surface (the metal area) of the left-hand head.
10
Move the carriage to a location where the cleaning stick reaches the front surface of the left-hand head.
While holding the tip of the cleaning stick against the front of the head, move the carriage to the left and right to wipe away
grime.
48
Right-hand side surface
Wipe away any grime on the metal area.
Left-hand head
* Do not touch the ink nozzle
(at the bottom area of the head).
Front surface
Left-hand head Wipe away any grime on the metal area.
* Do not touch the ink
nozzle (at the bottom
area of the head).