Powerup - Roland FJ-500 User Manual

2 Basic Operation

2-2 Powerup

Be sure to mount the drain bottle before turning on the power.
When you're using the machine for the first time, turn on
1
the main power switch on the side of the unit.
* Leave the main power switch on, and in daily use, use
the sub power switch to turn the power on and off.
2 Press the [POWER] key (the sub power switch) on the
operation panel.
When the power is turned on for the first time, or turned on after removing the ink
The POWER LED lights up
Roland FJ-500
Ver.1.00
Roland FJ-500
INK NOT FILLED
RAISE THE HEAD
LOWER THE HEAD
LOWER THE HEAD
20
No ink is filled.
Make the setting for the initial
head-height position.
Refer to "4-2 Adjusting the
Height of the Printing Head" and
move the lever to the "2 (High)"
position.
Move the lever to the "1 (Low)"
position.
Press the [ENTER] key.
Switch to "I"
The POWER LED lights up
Select the installed ink type and
SELECT INK TYPE
press the [ENTER] key.
PIGMENT 8COLOR
PIGMENT 8COLOR / PIGMENT 4COLOR / DYE
4COLOR / PIGMENT & DYE 4
Attach the drain bottle and press the
INSTALL
[ENTER] key.
DRAIN TANK
Ink-filling is performed.
FILLING INK...
This operation takes several minutes.