Introduction; Control Panel Ta23 - ESAB Origo TA23 Instruction Manual

GB
1

INTRODUCTION

The manual describes the use of TA23 control panel.
For general information about operation see user's instructions for the power source.
When mains power is supplied the unit runs a self diagnosis of the
LEDs and the display, the program version is displayed and in this
example the program version is 0.18A
1.1

Control panel TA23

Knob for setting current (A) or time (s)
Display
Choice of welding method TIG
Choice of HF start
Choice of 2-stroke
Setting from panel
Display of VRD function (reduced open-circuit voltage) is active or inactive.
Indication of which parameter is shown in the display (current or seconds)
Choice of setting parameter, see page 4
Indication of selected setting parameter, see page 4
bi15d1ea
or MMA
or LiftArct
or 4-stroke
or for connecting remote control unit
- 3 -