Dmx Mode; Dmx Addressing; View Dmx Value - ProLights Reflex User Manual

3.4 DMX MODE

• Press the MENU button and select, via the directional buttons, the [DMX FUNCTIONS] menu choice, then
press the ENTER button to confirm the choice.
• Select the [DMX Address] menu voice and confirm the choice by pressing the ENTER button.
• Edit the DMX address value into the [1 - 512] range using the UP/DOWN buttons.
• Press the ENTER button to confirm the DMX address value.
• Press the MENU button to go back or waiting for one minute for automatic exit from the menu.

3.5 DMX ADDRESSING

To able to operate the REFLEX with a light controller, adjust the DMX start address for the first a DMX chan-
nel. If e. g. address 33 on the controller is provided for controlling the function of the first DMX channel,
adjust the start address 33 on the REFLEX. The other functions of the light effect panel are then automati-
cally assigned to the following addresses. An example with the start address 33 is shown below:
Number of Start address
DMX channels (example)
15 33
DMX Address: 33
DMX512 Controller

3.6 VIEW DMX VALUE

It is possible to view the DMX value and the relative function on the LCD display in the following way:
• Press the MENU button, select the [DMX FUNCTIONS] menu voice and press the ENTER button to confirm
the choice.
• Select the [View DMX Value] menu voice and confirm the choice by pressing the ENTER button.
• Use the directional buttons to view all the menu voices.
• Press the MENU button to go back or wait for one minute for automatic exit from the menu.
DMX Address Next possible start
occupied address for unit No. 1
33-47
DMX Address: 48
Example 15 DMX channels configuration
REFLEX
Next possible start
address for unit No. 2
48
DMX Address: 63
Next possible start
address for unit No. 3
63
DMX Address: 78
Fig.5
11
78
. . . . . . . . . . . .