Dmx Mode; Dmx Addressing - ProLights ECLJZIPLZ1530 User Manual

3.4 DMX MODE

• Press on MODE and select Connect and press on ENTER to confirm.
• Press on UP/DOWN to select DMX Mode, then choose the desired DMX mode: 1 Ch or 3Ch. Press on ENTER
to store.
• Press on MODE to go back or to meet the waiting time to exit the setup menu.
The tables on page 12 indicate the operating mode and DMX value.

3.5 DMX ADDRESSING

• Press on MODE and select Connect and press on ENTER to confirm.
• Press on UP/DOWN to select Dmx Address, then choose the desired DMX address: 001 - 512. Press and hold
to scroll quickly.
• Press on ENTER button to store.
• Press on MODE button to go back or to meet the waiting time to exit the setup menu.
To able to operate the ECLJZIP with a light controller, adjust the DMX start address for the first a DMX chan-
nel. If e. g. address 33 on the controller is provided for controlling the function of the first DMX channel,
adjust the start address 33 on the ECLJZIP. The other functions of the light effect panel are then automati-
cally assigned to the following addresses.
An example with the start address 33 is shown below:
Number of Start address
DMX channels (example)
1 33
3 33
DMX Address: 33
DMX512 Controller
DMX Address
occupied address for unit No. 1
33
33-35
DMX Address: 36
ECLJZIP
Next possible start
address for unit No. 2
34
36
DMX Address: 39
Fig.5 - Example 3 DMX channels configuration
Next possible start
address for unit No. 3
35
39
DMX Address: 42
9
Next possible start
36
42
. . . . . . . . . . . .