Reset Functions; Special Functions; Home Position Adjust - ProLights Reflex User Manual

3.15 RESET FUNCTIONS

Enter MENU mode, select [Reset Function], press ENTER button to confirm, use UP/DOWN button to select
options.
- [Pan/Tilt] - Select [Pan/Tilt], press ENTER button to confirm, use UP/DOWN button to select [Yes] (the
unit will run built-in program to reset pan and tilt to their home positions) or [No], press ENTER
button to store. Press MENU button back to the last menu or let the unit idle one minute to exit
menu mode.
- [Zoom] - Select [Zoom], press ENTER button to confirm, use UP/DOWN button to select [Yes] (the unit
will run built-in program to reset Zoom to their home positions) or [No], press ENTER button to store.
Press MENU button to exit.
- [All] - Select [All], press ENTER button to confirm, use UP/DOWN button to select [Yes] (the unit will
run built-in program to reset all motors to their home positions) or [No], press ENTER button to store.
Press MENU button to exit.

3.16 SPECIAL FUNCTIONS

• Press the MENU button and select through the directional buttons the [Special Function] menu voice.
• Press the ENTER button to confirm.
It is possible to view to following information:
Fixture Maintenance
• Select the [Fixture Maintenance] menu voice.
• Press the ENTER button to confirm.
• Select the [Interval] menu voice and press the ENTER button to view the time range between two main-
tenance operations. Press the MENU button to go back.
• Select the [Remain Time] menu voice and press the ENTER button to view the remaining time. Press the
MENU button to go back.
• Select through directional buttons the [Exit] or [Reset time] menu voice, to exit or reset the time.
• Press the ENTER button to confirm the choice.
Factory Settings
Allow to restore the unit to the factory settings.
• Select through directional buttons the [Factory setting] menu voice.
• Press the ENTER button to confirm the choice.

3.17 HOME POSITION ADjUST

In the main functions, hold Enter button for at least 3 seconds into offset mode, use DOWN/UP button
up to chose Pan Offset, Tilt Offset or Zoom Offset, pressing ENTER button and the display will blink. Use
DOWN/UP button to adjust the home position of the Pan, Tilt or Zoom, Once the position has been se-
lected, press the ENTER button to setup, to go back to the functions without any change press the MENU
button again. Hold and press the MENU button about one second or wait for one minute to exit the menu
mode.
REFLEX
OFFSET MENU
Pan
-128 ~ 127
Tilt -128 ~ 127
Zoom
0 ~ 255
17