Installation; Mounting - ProLights Reflex User Manual

8

- 2 - INSTALLATION

2.1 MOUNTING

The REFLEX may be set up on a solid and even surface. By means of the fixing facilities of the baseplate, the
unit can also be mounted upside down to a cross arm (fig.3). For fixing, stable mounting clips are required.
Always ensure that the unit is firmly fixed to avoid vibration and slipping while operating. The mounting
place must be of sufficient stability and be able to support a weight of 10 times of the unit's weight. When
carrying out any installation, always comply scrupulously with all the regulations (particularly regarding
safety) currently in force in the country in which the fixture's being used.
Always additionally secure the projector with the safety rope from falling down.
For this purpose, fasten the safety rope at a suitable position so that the maximum fall of the projector
will be 20 cm.
REFLEX
CLAMP
OMEGA
BRACKETS
Fig.3
SAFETY
CABLE