Dmx Configuration; Dmx Mode - ProLights ECL Series User Manual

12

3.8 DMX CONFIGURATION

ECL is equipped with different DMX configuration.
• Press the button MENU so many times until shows DMX CHANNEL, and press the button ENTER to confirm.
• Select the desired DMX configuration (1CH - 2CH - 5CH) through the buttons UP/DOWN.
The tables on page 15 indicate the operating mode and DMX value. The ECL is equipped with 5-pole XLR
connections.

3.9 DMX MODE

• Press the button MENU so many times until the display shows DMX ADDRESS, and press the button ENTER
to confirm.
• Press UP/DOWN button to select the desired value (001-512). Press and hold to scroll quickly.
• Press ENTER button to store.
• Press the MENU button to go back or to meet the waiting time to exit the setup menu.
To able to operate the ECL with a light controller, adjust the DMX start address for the first a DMX channel.
If e. g. address 33 on the controller is provided for controlling the function of the first DMX channel,
adjust the start address 33 on the ECL. The other functions of the light effect panel are then automatically
assigned to the following addresses.
An example with the start address 33 is shown below:
Number of Start address
DMX channels (example)
5 33
DMX Address: 33
DMX512 Controller
ECL
DMX Address Next possible start
occupied address for unit No. 1
33-37
DMX Address: 38
Next possible start
address for unit No. 2
38
DMX Address: 43
Fig.5 - Example 5 DMX channels configuration
Next possible start
address for unit No. 3
43
DMX Address: 48
48
. . . . . . . . . . . .