- 3 - FUNCTIONS AND SETTINGS
3.1 OPERATION
Connect the supplied main cable to a socket (100-240V~/50-60Hz). The unit will run built-in program to
reset all motors to their home position. Shortly after that the REFLEX is ready for operation. To switch off,
disconnect the mains plug from the socket. For a more convenient operation it is recommended to con-
nect the unit to a socket which can be switched on and off via light switch.
3.2 BASIC
The REFLEX has a LCD display and 4 button used to access the control panel functions and manage them
(fig.4).
MENU
Used to access the menu or
to return a previous menu
option
REFLEX
ENTER
Used to select and store the
current menu or confirm the
current function value or
option within a menu
Fig.4
UP
Navigates upwards through
the menu list and increases
the numeric value when in a
function
DOWN
Navigates downwards
through the menu list and
decreases the numeric value
when in a function
9