Operation; General Information; Dialling Mode; Memory Capacity - TIPTEL Profi Clip Operating Instructions Manual

Operation

General information

Dialling mode

The device should only be operated at DTMF telephone networks or behind PABXs (no earth button,
only flash key for hold).

Memory capacity

-
entries in the electronic telephone book: up to 65 names (a maximum of 16 characters) and phone
numbers (a maximum of 18 digits)
-
5 speed dialling keys with a phone number and a name each: M1 to M5
-
call list for up to 60 incoming calls with indication of date and time
-
storing of the last dialled number for redialling

Factory pre-set parameters

Setting of the loudspeaker volume

By pressing the keys
or decreased. The relevant setting (0-7) is displayed.

Setting of call signalling

By means of the slide switch at the bottom cabinet of the telephone housing, the volume of call signalling
can be increased or decreased.

Function menu

The function menu is controlled via the
menu at any time without modifying the parameters/settings by pressing the
parameters and settings).
In order to get to the function menu, press the
indicated in the display. Select from the following menu items by means of the keys
- Display contrast
- Dialling mode
Modification of flash signal
-
- Language used for display texts
Time and date
-
VIP
-
To confirm your selection, press the
modifications are carried out by pressing the keys
menu button menu button
menu button menu button
again.
Remark:
If a menu item is not selected within 8 seconds or if a setting is not modified within 15 seconds, the
telephone returns to the initial state.
For the following settings, please select the correspondingly requested menu items.
D D D D Ñ Ñ Ñ Ñ
and , the loudspeaker volume can be increased
menu menu
menu menu
m m m m enu button enu button enu button enu button
button as well as by the keys
. The first menu item CONTRAST is
menu button menu button menu button menu button
CONTRAST
DTMF MODE OR PULSE MODE
FLASH=X
(X =100 MS OR 300 MS)
GERMAN OR ENGLISH
HH:MM DD MMM
NAME OR EMPTY
. The display shows the current settings. The desired
D D D D Ñ Ñ Ñ Ñ
or . To store the requested function, press the
Page 8
VOLUME = 3
D D D D Ñ Ñ Ñ Ñ
and . You may leave the
menu menu
menu menu
button (checking of
D D D D Ñ Ñ Ñ Ñ
or :