Call-back (call completion)
Here you have the option to enable a call-back. When enabled, the phone waits
until the called party hangs up (call-back on busy) or has performed an action
(call-back on no reply). Once the phone identifies the new status, dial preparation
opens with the telephone number. Now simply pick up the receiver to call the
party again.
Note:
The function must be activated in the configuration and be sup-
ported by the telephone system.
Manual redial
Use the "Redial" key to open the "Dialled numbers" call history. Pressing the key
again starts dialling the number last called. Use the down control key to select a
number dialled previously and then dial this number with the "Dial" key.
Key protection
You can enable key protection to protect your phone against unauthorised use. It
can be manual or automatic following a set time. You can also PIN-protect the
disabling of key protection.
Manual key protection activation
To activate key protection, press the "Asterisk" key for 3 seconds. Key protection is
enabled and a lock is shown in the top left of the display.
To disable key protection, press the "Asterisk" key for 3 seconds and enter the PIN
if required. Key protection is disabled and the lock is no longer shown.
Automatic key protection activation
Key protection is activated automatically after the preset time. A lock is shown in
the top left of the display.
To disable key protection, press the "Asterisk" key for 3 seconds and enter the PIN
if required. Key protection is disabled and the lock is no longer shown.
Outgoing calls
24