Call Forward - TIPTEL IP-280 Manual

Enterprise IP Phone
2) Set the DND On Code and the DND Off Code, then press the OK button to save the
changes.
3) When you enable the DND function, the phone will send a message to the server,
and the server will turn on the DND function. Then any calls to the extension will be
rejected by the server automatically. And the incoming call record will not be
displayed in the Call History.
Note:
The DND function can also be Enabled/Disabled in the hidden page.

Call Forward

This feature allows you to forward an incoming call to another phone number e.g. a cell
phone or voice mailbox.
The following call forwarding events can be configured:
Always: Incoming calls are immediately forwarded.

Busy: Incoming calls are immediately forwarded when the phone is busy.

:
No Answer Incoming calls are forwarded when the phone is not answered after a

specific ring times.
To configure Call Forward via Phone interface:
1) Press the following keys: MENU->Features->Forward->OK. You can also press the
Tran button or the corresponding DSS key to enter the forward setting page directly
when the phone is idle.
2) There are 3 options: Always, Busy and No Answer.
3) If you choose one of them, enter the phone number you want to forward.
4) If you want to realize this function by server, please enter the On Code and Off Code
option, then when you choose to enable the call forward function via your IP phone,
it will send message to the server, and the server will turn on the function
immediately. When there is call to the extension, the server will forward it to the set
number automatically based on the forward type. And the IP phone will not show
the record in the call history anymore.
5) Press the OK button to save the changes.
To configure Call Forward via Web interface:
Choose Phone->Features->Forward to do the relating changes. Please refer the above
configuration information.
Note:
Using the Basic Phone Functions
- 28 -