Maintenance Tasks; Administrator Mode; Administrator/User Password; Reboot - TIPTEL IP 284 Manual

Enterprise IP Phone

Maintenance Tasks

Administrator Mode

The phone allows two modes to configure the phone:
User Mode

Administrator Mode

Administrator mode grants unlimited access to the phone configuration on both Web
and Phone interface. User Mode is not able to access the settings on the Phone interface
such as: Accounts, Network, Reset to Factory, other advance phone settings.

Administrator/User Password

Administrator mode grants unlimited access to the phone configuration on both web
and phone user interface. The administrator/user password is used to access:
Web interface.

the advanced settings of the phone such as Network, Account, Reset to Factory

Settings via the Phone interface.
The default administrator password is admin. Meanwhile the user name for Web
interface access is admin.
To change the administrator password via Phone interface:
1) Press Menu-> Settings-> Advanced Settings.
2) You are prompted to enter the required password, the default one is admin.
3) Scroll to Set Password, press Enter hot key.
4) You are prompted to enter the Current, New and Confirm password, press abc hot
key to change the input method.
5) Press Save hot key to confirm the change, or Back hot key to return to the previous
menu.
To change the administrator password via Web interface:
Choose Security->Password->admin, enter the Current, New and Confirm password,
click Confirm button to save the changes, or Cancel button to cancel the changes.
To logout via Web interface:
Click the Logout button in the top right corner.

Reboot

You should reboot the phone when you are challenged, e.g. after applying changes to
the phone configuration.
Using the Advanced Phone Functions
- 74 -