Using The Advanced Phone Functions; Account Setting; Network Setting; Vlan Setting - TIPTEL 28XS Manual

Simply IP Phone

Using the Advanced Phone Functions

Account Setting

Please refer to the previous part "Configuration and Registration" for the basic account setting
information. The following table lists the instruction of the field about the advanced Account
Setting.
Field Name
UDP Keep-alive
Message
UDP Keep-alive Interval
Login Expire
Local SIP Port
RPort
SIP Session Timer
Subscribe
Period
DTMF Type
You can consult your system administrator for more information.

Network Setting

VLAN Setting

VLAN is a group of hosts with a common set of requirements that communicate as if they were
attached to the Broadcast domain, regardless of their physical location. The following table lists
the instruction of the field about the VLAN Setting.
Field Name
Voice QoS
Local RTP Port
Defines whether to active the phone UDP Keep-alive mechanism. The
default is Enabled.
This parameter specifies how often the phone will send a packet to the
SIP server. Default is 30 seconds.
This parameter specifies the time frequency that phone refreshes its
registration. The default interval is 3600 seconds.
Local SIP port. The default value is 5060.
The parameter allows you configuring the proxy to send responses
back to a particular address and port. The default is disabled.
This document defines an extension to the Session Initiation Protocol
(SIP). This extension allows for a periodic refresh of SIP sessions
through a re-INVITE or UPDATE request. The refresh allows both user
agents and proxies to determine if the SIP session is still active.
This parameter could set the period of the subscription. The default
value is 3600.
Select the DTMF type.
When the network capacity is insufficient, QoS could provide priority to
users by setting the value.
Define the port for voice transmission.
- 19 -
Trouble Shooting
Description
Description