Table of Contents
Advertisement
To define how to display the received video on motion detection and input trigger from
the GV-Video Server, click the Preference Setting button and select System
Configure. This dialog box appears.
Figure 8-3
Manual close channel: Closes the triggered camera view manually.
Close the camera view when motion stopped: Closes the triggered camera
view automatically when motion stops.
Post Motion: Specify the duration of the camera view remaining on the
monitoring window after motion stops.
Camera send by I/O trigger will monitor: Specify the duration of the camera
view remaining on the monitoring window when an I/O device is triggered.
To keep the camera view remaining on the monitoring window even after the
alarm is finished, click the right-arrow button, and uncheck Latch Trigger.
Then the camera view will keep remaining on the monitoring window for the
specified time. For example, the alarm is triggered for 5 minutes and you set 10
minutes, which means the total display time will be 15 minutes.
Camera send by Wiegand capture device will monitor: Specify the duration
of the camera view remaining on the monitoring window when the card reader,
connected to GV-Video Server, is triggered. For the related Wiegand settings
on the GV-Video Server, see 4.2.3 Wiegand Port.
For further information on how to mange the received video from the GV-Video Server,
see GV-CMS Series User's manual.
CMS Configurations
8
89
Advertisement
Table of Contents
