GeoVision GV-Video Server User Manual page 65

Hide thumbs Also See for GV-Video Server:
Table of Contents

Advertisement

Keep days (1-255): Specify the number of days to keep the files from 1 day to 255
days. When both Keep days and Enable recycling are selected, the system applies
whichever condition comes first. For example, if the specified smallest amount of
storage space comes earlier than the designated keep days, then recycle is applied
first.
[Disk Information]
This section shows the details of the attached storage devices.
[Partition Information]
This section shows the partition details of the attached storage devices.
To add a USB mass storage device:
1. Attach the device to the GV-Video Server.
2. Click the Format button.
After the format is complete, the partition information will display. The maximum space for
one partition is 200 GB.
To remove a USB mass storage device:
1. Click the Remove button.
2. When you are prompted to ensure the action, click Yes. The page will be refreshed
and the partition information will be cleaned.
3. Remove the device from the GV-Video Server.
Note:
If Enable Recycle is selected, the available space of the USB mass storage device
must be higher than the space you specified at the Stop recording or recycle disk
when free space of disk is smaller than x option. Otherwise no video will be
recoded.
The recording data may be lost if you remove the USB mass storage device during
recording.
If you do not remove the USB storage device properly, the data cannot be read in
another computer. In this case, re-plug the storage device back to the GV-Video
Server. The system will repair the data automatically. When the system is repairing
the data, the Remove field will display "Repairing".
60

Advertisement

Table of Contents
loading

Table of Contents