Events & Alerts; E-Mail - GeoVision GV-Video Server User Manual

Hide thumbs Also See for GV-Video Server:

Table of Contents

4.3 Events & Alerts

For the events of motion detection or I/O trigger, the Administrator can set up the two

trigger actions:

1. Send a captured still image by e-mail or FTP.

2. Notify Center Monitoring Station, Center V2 or VSM or GV-GIS, by video or text

alerts.

To have above trigger actions, you must set the following features in advance:

•

Motion Detection (See 4.1.2 Motion Detection)---optional

•

Input Setting (See 4.2.2 Input/Output Settings)

•

For e-mail and FTP alerts, it is required to start monitoring (See 4.4 Monitoring).

Note: The Motion Detection function is an optional setting since it is activated by default.

After a trigger event, the GV-Video Server can send the e-mail to a remote user containing

a captured still image.

[Enable] Select to enable the e-mail function.

Sever URL/IP Address: Type the SMTP Server's URL address or IP address.

Figure 4-13

Administrator Mode

Table of Contents