GeoVision GV-Video Server User Manual page 48

Hide thumbs Also See for GV-Video Server:

Table of Contents

2. Host Name or IP Address: Type the host name or IP address of GV-GIS.

3. Port Number: Match the communication port on GV-GIS. Or keep the default value

3356.

4. User Name: Type a valid user name to log into GV-GIS.

5. Password: Type a valid password to log into GV-GIS.

6. Click Apply. The Connection Status should display "Connected" and connected time.

These options you can also find on this GV-GIS setting page:

Cease motion detection messages from: Stops notifying GV-GIS of motion

detection from selected camera(s).

Cease input trigger messages from: Stops notifying GV-GIS of input trigger from

selected input(s).

Enable schedule mode: Starts the monitoring through GV-GIS based on the schedule

you set in the Select Schedule Time section. Refer to 4.5 Recording Schedule for the

same settings.

For related settings to activate the monitoring through GV-GIS, see 4.1.2 Motion Detection,

and

4.2.2 Input/Output Setting.

Administrator Mode

Table of Contents