GeoVision GV-Video Server User Manual page 90

For details on creating an E-Map file on the E-Map Server, see "E-Map Server", E-Map
Application, User's Manual on the Surveillance System Software CD.
Connecting to GV-Video Server
Depending on where you save the created E-Map file (GV-System, E-Map Server or
Control Center), the steps to open the Remote E-Map window for monitoring may vary
slightly. The following is the connection example when you store the E-Map file in the GV-
System.
1. To enable the remote access to the GV-System, click the Network button, select
WebCam Server to display the Server Setup dialog box, and click OK to start the
WebCam server.
2. At the local computer, open the web browser and type the address of the GV-System.
The Single View page appears.
3. Select Emap. The valid user name and password are required for login. For the first-
time user, you will be directed to the Download page. Install the E-Map program before
you can run it.
4. On the Remote E-Map window, click the Login button and select the GV-Video Server
host to access its videos and I/O devices. The valid user name and password are
required to log in the GV-Video Server.
For details on the Remote E-Map functions, see "The Remote E-Map Window", E-Map
Application, User's Manual on the Surveillance System Software CD.
DVR Configurations
7
85