Table of Contents
Advertisement
Note: The input settings only function after you start Input monitoring manually or by
schedule. To configure the input monitoring, see 4.4 Monitoring.
For related PTZ settings, see 4.2.1 PTZ Settings.
The GV-Video Server can connect up to 4 output devices, e.g. alarms. Select Enable to
start the output device. Choose the output signal that mostly suits the device you are using:
N/O (Open Circuit), N/C (Grounded Circuit), N/O Toggle, N/C Toggle, N/O Pulse and N/C
Pulse. Set the pulse duration for the pulse mode.
Figure 4-9
Administrator Mode
4
31
Advertisement
Table of Contents
