GeoVision GV-Video Server User Manual page 11

1. Open your web browser, and type the default IP address
2. In both Login and Password fields, type the default value admin. Click Apply.
3. In the left menu, select Network and then LAN to begin the network settings.
4. Select Static IP address. Type IP Address, Subnet Mask, Router/Gateway, Primary
DNS and Secondary DNS in the Configure connection parameters section.
5. Click Apply. The GV-Video Server is accessible by entering the assigned IP address
on the web browser.
Important:
•
Dynamic IP Address and PPPoE should only be enabled if you know which IP
address the GV-Video Server will get from the DHCP server or ISP. Otherwise,
you must use the Dynamic DNS service to obtain a domain name linked to the
GV-Video Server's changing IP address first.
For details on Dynamic DNS Server settings, see 4.7.3 Advanced TCP/IP.
•
If Dynamic IP Address and PPPoE is enabled and you cannot access the unit,
you may have to reset it to the factory default settings and then perform the
network settings again.
To restore the factory settings, see the Default button in 1.5.1 Front View.
6
Figure 2-2
http://192.168.0.10