GeoVision GV-Video Server User Manual page 42

[Upload to a FTP Server]
Enable: Select to enable the FTP function.
Server URL/IP Address: Type the URL address or IP address of the FTP Server.
Port Number: Type the port number of the FTP Server. Or keep the default value 21.
User Name: Type a valid user name to log into the FTP Server.
Password: Type a valid password to log into the FTP Server.
Remote Directory: Type the name of the storage folder on the FTP Server.
Alerts Interval time in minute: Specify the interval between FTP alerts. The interval
can be between 0 and 60 minutes.
Continuously send images upon trigger: A sequence of snapshot images are
uploaded to the FTP Server when trigger events occur.
Snapshot Resolution: Select D1 or CIF to be the resolution of snapshot images.
[Act as FTP Server]
Enable FTP access to the video server: The GV-Video Server acts as a FTP server,
enabling users to download AVI files.
Use alternative port: The default port is set to 21.
To access the internal FTP server through a web browser, enter the IP address or the
domain name of the GV-Video Server in your browser like this: fpt://192.168.0.10. When
you are prompted for Username and Password, enter the default value videoserver in
both fields. Then you should find the AVI files recorded upon trigger events.
To change login information of the internal FTP server , see 4.8.5 User Account.
For the related settings to send FTP alerts, see 4.1.2 Motion Detection, 4.2.2 Input/Output
Settings and 4.4 Monitoring.
Administrator Mode
4
37