Table of Contents
Advertisement
The setup page:
Transfer Card Number to Center V2, VMS and DVR: Sends the cardholder data to
Center V2, VSM and GV-System once the card reader is triggered.
Send video to Center V2 and DVR when the Wiegand device is triggered: The
selected camera(s) will start recording into GV-Video Server and the related video will
also be sent to Center V2 and GV-System once the card reader is triggered.
Note: To receive cardholder data from the GV-Video Server, the GV-System must be
version 8.2 or later.
For the related settings, see 4.3.3 Center V2, 4.3.4 VSM and 7.2 Receiving Cardholder
Data from Video Server.
Figure 4-11
Administrator Mode
4
33
Advertisement
Table of Contents
