Volkswagen Golf Variant 2007 Maintenance Manual page 135

Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
Maintenance - Edition 09.2009
– If necessary, unclip cable so that there is sufficient room to
remove the oil filter cover.
– Remove threaded cover -arrow-.
Note
Before draining or extracting release sealing cap, so that the en‐
gine oil can flow out of filter housing.
– Clean sealing surfaces on threaded cap and oil filter housing.
Installing
– Renew filter element -3-.
– Renew O-rings -2 and 4-.
– Install threaded cap -arrow- and tighten to 25 Nm.
The remaining assembly steps are basically a reverse of the dis‐
mantling procedure.
131
4. Descriptions of work