Volkswagen Golf Variant 2007 Maintenance Manual page 185

4.62.3 Renewing spark plugs, 1.4 l TSI engines
(90 kW)
Note
The ignition coil housings with output stages have changed. As a
result, these ignition coils can only be removed and installed with
puller -T10094 A-. The previous puller -T10094- can further be
used if adapted as described below.
– Using suitable workshop tools mill marked area -2- to reach
new nominal dimension -B- of 18 mm.
– Also mark tool identification with letter A -1-.
Removing:
– Remove engine cover
Note
To simplify removing and installing spark plugs, loosen some
components and place them to side.
– Remove bolt -arrow 1-.
– Pull off line -arrow 2-, (press together to release).
– Pull hoses -arrows 3- out of bracket.
– Pull hose -B- off connection -arrow 4-.
– Pull hose off connection -arrow 1-.
– Pull hoses -arrows 2- out of bracket.
– Pull line -A- off connection -arrow 3-.
– Place line -A- to side.
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
⇒ page 105 .
Maintenance - Edition 09.2009
4. Descriptions of work
181