Volkswagen Golf Variant 2007 Maintenance Manual page 186

Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
Maintenance - Edition 09.2009
– Disengage clamps of cable guide -arrows-.
Note
When pulling out the ignition coils with output stages, the ca‐
♦
bles or the ignition coil connectors can remain connected.
Note installation position of ignition coils with output stages.
♦
– Carefully place ignition coils with output stages and cables
connected to side.
Caution
Ensure that the cables are not kinked or damaged.
– Seat puller -T10094 A- on ignition coil with output stage.
– Pull out ignition coil with output stage and carefully place to
side.
– Unscrew spark plugs using spark plug socket and extension -
VAS 3122B- .
Installing:
– Screw in new spark plugs using spark plug socket and exten‐
sion -VAS 3122B- .
Note
Spark plug designation and torque setting ⇒ Power unit; Rep.
♦
Gr. 28 ; Test data, spark plugs
Observe disposal regulations!
♦
– Place puller -T10094 A- on ignition coil with output stage.
– Push ignition coil with output stage into cylinder head until they
noticeably engage.
– Route cables properly in cable guide.
182
4. Descriptions of work