Volkswagen Golf Variant 2007 Maintenance Manual page 184

Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
Maintenance - Edition 09.2009
– Seat puller -T10094 A- on ignition coil with output stage.
– Pull out ignition coil with output stage and carefully place to
side.
– Unscrew spark plugs using spark plug socket and extension -
VAS 3122B- .
Installing:
– Screw in new spark plugs using spark plug socket and exten‐
sion -VAS 3122B- .
Note
Spark plug designation and torque setting ⇒ Power unit; Rep.
♦
Gr. 28 ; Test data, spark plugs
Observe disposal regulations!
♦
– Place puller -T10094- on ignition coil with output stage.
– Push ignition coil with output stage into cylinder head until they
noticeably engage.
– Route cables properly in cable guide.
– Engage clamps of cable guide -arrows-.
– Set hose with bracket and charge pressure control solenoid
valve -1- to original installation position.
– Connect connector -arrow C-.
– Connect hose ends -arrow A- and -arrow E-.
– Connect hose -arrow D-.
– Tighten bolt -arrow B-.
– Install engine cover
180
4. Descriptions of work
⇒ page 105 .