– Pull out dipstick -1-.
– Unclip engine cover at the securing points -2- and remove up‐
wards.
Installing:
– Fit engine cover -arrows A- to securing pins -arrows B- first.
– Then fit to other securing points -2- and press on, so that it
noticeably engages.
4.29.10 Removing and installing engine cover:
2.5 l petrol injection engines
Special tools and workshop equipment required
♦ Spring-type clip pliers -VAS 5024A-
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
Maintenance - Edition 09.2009
4. Descriptions of work
111