Volkswagen Golf Variant 2007 Maintenance Manual page 190

Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
Maintenance - Edition 09.2009
– Screw in new spark plugs using spark plug socket and exten‐
sion -3122 B- .
– Insert ignition coils with output stages into cylinder head.
– Align ignition coils with output stages in respective recesses
of cylinder head cover.
– Fit all connectors onto ignition coils -arrows-.
– Press ignition coils with output stages on spark plugs until stop
by hand. They must be felt to engage.
– Secure cable guides with bolts -1-.
– Install engine cover.
4.62.6 Renewing spark plugs, 2.0 l TFSI en‐
gines
Removing:
Carry out the following procedure:
Note
To pull off spark plugs, fit puller -T40039- on top, thick rib
♦
-arrow- of ignition coils with output stages.
If the lower ribs are used, they could be damaged.
♦
– Remove engine covers
186
4. Descriptions of work
⇒ page 105 .