Volkswagen Golf Variant 2007 Maintenance Manual page 58

Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
Maintenance - Edition 09.2009
– Check contact surfaces -arrows- of ball head mounting for
corrosion.
– If contact surfaces are corroded, eliminate corrosion with a tri‐
angular scraper and clean the treated areas with silicone
remover.
– Apply a thin coat of lubricating paste G 000 650 or G 000 150
on cleaned surfaces.
– Check contact surfaces -arrows- of ball head for corrosion.
– If contact surfaces are corroded, eliminate corrosion with a tri‐
angular scraper and clean the treated areas with silicone
remover.
– Apply a thin coat of lubricating paste G 000 650 or G 000 150
on cleaned surfaces.
– Check again ball head seat in mounting
– After checking, fit protective cap -1- into ball head mounting
-2-.
Note
If protective cap is damaged or not available, a new protective
cap must be fitted to protect ball head mounting against corrosion
⇒ ETKA .
– Insert cover -1-.
54
4. Descriptions of work
⇒ page 53 .