Volkswagen Golf Variant 2007 Maintenance Manual page 113

– Disengage engine cover at the securing points -2- and remove
upwards.
Installing:
– Fit engine cover at securing points -2- and press on, so that it
engages.
– Fit connector -C- and hose connection -B-.
– Connect hose and tighten clip -A-.
– Slide oil dipstick -1- into guide tube.
4.29.6 Removing and installing engine cover,
1.8 l TSI and 2.0 l TSI petrol direct in‐
jection engines
Removing:
– Disengage engine cover at the securing points -arrows- and
remove upwards.
Installing:
– Fit engine cover at securing points -arrows- and press on until
it engages.
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
Maintenance - Edition 09.2009
4. Descriptions of work
109