Cooling Unit Fans; Doors; Storage Procedures; Interior Light - Holiday Rambler Imperial 2008 Owner's Manual

APPLIANCES — 4

Cooling Unit Fans

The cooling unit is equipped with a pair of
cooling fans that pass air across the cooling unit.
These fans start automatically and are audible
when in operation.

Doors

The refrigerator doors use a positive latch
that secures the door with a "click" to prevent
the door from opening during travel. Mold
and mildew can contaminate a completely
sealed refrigerator in storage. The motorhome
refrigerator has a storage position to lock the
doors partially open and promote airfl ow that
will help prevent mold build up.
Standard Refrigerator Door Latch
90
Optional Refrigerator Door Latch
To use the refrigerator storage position:
1. Completely empty the refrigerator.
2. Disconnect power to the refrigerator.
3. Clean the interior box thoroughly using
a soft cloth to remove stains and spills.
4. Partially open doors and slide tab into
the cut-out of the striker plate.

Storage Procedures

Storage Feature:
Turn the refrigerator OFF and remove
all items. Leave the drip tray under the
030965c
cooling fi ns.
DO NOT use a heating gun, hair dryer
or sharp objects to remove frost as these
can damage the interior or cooling unit.
2 00 8 I MP E R I A L
Wash the interior using mild spray
cleaners or a solution of liquid dish
detergent and warm water. DO NOT use
scouring pads or abrasive cleaners that
can damage the interior fi nish.
Rinse with a solution of baking soda and
water. Dry with a clean cloth.
Lock the doors open.
CAUTION:
DO NOT use a hot air blower to defrost.
Permanent damage could result to
plastic parts. DO NOT use a knife, ice
pick or any other sharp instrument to
remove ice from the freezer as they can
030965f
puncture the system.

Interior Light

The interior light is located at the top of the
fresh food compartment. When the door is open
the light will illuminate.
Bulb Replacement:
1. Remove the light cover by pulling it
toward the front of the refrigerator.
2. Remove the light bulb from the holder.
3. Install a GE#214-2 replacement bulb
and replace the cover.
031116