Wheels - Coated Aluminum; Bright Metal; Exterior Maintenance - Holiday Rambler Imperial 2008 Owner's Manual

Table of Contents

Advertisement

EXTERIOR & INTERIOR CARE — 3

Wheels - Coated Aluminum

Inside:
If the tires are removed, inspect and clean the
entire rim. Air used to fi ll the tire may contain
moisture and can cause the areas of the wheel
under the tire to severely corrode. Use a soft
brush to remove foreign material from the
tire side of the rim. Lubricate the rim and tire
bead with a non-water-based lubricant before
mounting the tire and ensure the inside of tire is
dry before installing.
WARNING:
DO NOT use a flammable solution to
coat the inside of the rim. This can lead
to an explosion during tire inflation
or in subsequent operation of the
motorhome.
Outside:
The coated surface of the wheels should
be treated the same as the paint fi nish on the
motorhome. Road soils, grime and brake dust
trap moisture which can cause corrosion over a
period of time.
1. Frequently clean using high-pressure
water.
2. Wash with a 100% cotton cloth and a
mild soap solution (dish soap or car
wash soap is recommended).
3. Rinse all remaining soap residue with
high-pressure water and wipe the
surface dry using a 100% cotton cloth
to avoid water spots.
58
4. A secondary hand washing may be
required to remove some stubborn road
fi lms.
5. Carnauba wax can be applied to help
protect the fi nish.
NOTE:
Allow heated wheels that are extremely
hot to cool before spraying with cold
water.
CAUTION:
DO NOT use the following items on
coated aluminum wheels:
Polishes (unless marked "safe for clear
coat" or Alcoa Aluminum Care).
Synthetic cleaning pads, wire or abrasive
brushes, steel wool or scouring pads
(these can mar or scratch the fi nish).
Strong detergents, alkaline or acidic
cleaners, acids or lye-based chemical
products or solvents.
CAUTION:
Rinse aluminum wheels using high-
pressure water to remove debris
from the surface before washing. DO
NOT scrub. Rubbing debris against
the surface of the wheel can result in
scratches. DO NOT allow soap solution
to dry on the finish of the wheel as
spotting will occur.
INFORMATION:
Instructions for cleaning, handling and
minor scratch repair to the coating can
be found in Accuride service bulletin
2.0037 Rev 1. Contact Accuride at 1-
800-626-7096 for further information.
2 00 8 I MP E R I A L

Bright Metal

All chrome and stainless steel should be
washed and cleaned each time the motorhome
is washed. DO NOT use rubbing compounds.
Use only automotive approved non-abrasive
cleaners and polishes on exterior bright work.
DO NOT use abrasive cleaners or compounds
to clean the mirrors.
NOTE:
When using chemicals to remove road
tars, use only automotive products that
are recommended for painted surfaces
and fiberglass. Observe the warning
recommendations and directions
printed on the container of any agent
being used.

EXTERIOR MAINTENANCE

The motorhome is exposed to extreme
temperatures, humidity, ultraviolet rays, rain
and other environmental conditions. While in
operation the motorhome is subject to twisting
and fl exing caused by rough roads, potholes
and winding mountain roads. Maintenance is
necessary not only to keep the exterior looking
nice, but also to keep it in proper working order.

Advertisement

Table of Contents
loading

Table of Contents