Lubrication Charts - Holiday Rambler Imperial 2008 Owner's Manual

CHASSIS INFORMATION — 10
To apply grease:
Clean the grease fi tting. Initially
operate grease gun until new lubricant
discharges from nozzle, then wipe nozzle
clean to avoid introducing contaminants
into the component.
Snap nozzle onto grease fi tting. Nozzle
must remain in line with the grease
fi tting during the application process. If
the nozzle is not in line, lubricant will
collect around nozzle and grease fi tting,
failing to lubricate the component.
Wrap the nozzle with a paper towel
or rag to prevent contamination and
accidental soiling of other areas.
If the component does not accept grease the
Zerk fi tting may be plugged or damaged. Zerk
fi ttings are replaceable and generally available
at most auto supply stores. Zerk fi ttings come in
a variety of angles depending on the application.
Every effort should be made to lubricate the
component, as neglect will only result in
premature component failure.
NOTE:
Some grease fittings may not be
accessible until the steering wheel is
turned or the motorhome is moved
slightly.
Typical Zerk Fitting (Not actual size).
258

LUBRICATION CHARTS

23
Cummins ISL
090368
2 00 8 I MP E R I A L
FRONT
070173ma
REAR
26
070174tj