Using Wpa - Ruckus Wireless ZoneFlex 2925 User Manual

Configuring the Access Point
Configuring WLAN Settings
Figure 26. WEP settings

Using WPA

Do not customize these options unless you are an experienced network
CAUTION:
administrator or are under the guidance of an IT/support professional.
Use of WPA PSK allows automatic key generation based on a single passphrase. WPA-
PSK provides very strong security, but may not be supported on older wireless devices.
In some cases, the older devices can be upgraded with adapters to take advantage
of WPA-PSK.
If you configure the AP with WPA-PSK, some network users will not be able to connect
to your WLAN unless their devices are manually set to WPA-PSK and configured with
the same passphrase.
To configure WPA encryption settings
1. Go to Configuration > Wireless. The Configuration :: Wireless :: Common page
appears.
NOTE: If you are using ZoneFlex 7962 AP, go to Configuration > Radio 2.4G or
Configuration > Radio 5G.
55