Allowing Only Stations Explicitly Listed In The Access Controls Table; Denying Only Stations Explicitly Listed In The Access Controls Table; Access Control Table Columns - Ruckus Wireless ZoneFlex 2925 User Manual

Allowing Only Stations Explicitly Listed in the Access
Controls Table
If you select Allow only stations listed in the Access Controls Table, then stations
entered into the access-controls table are allowed but all others are disallowed. To
add MAC addresses, see
Denying Only Stations Explicitly Listed in the Access
Controls Table
If you select Deny only stations listed in the Access Controls Table, then stations
entered into the access-controls table are disallowed but all others are allowed. To
add MAC addresses, see

Access Control Table Columns

The Access Control table contains the following columns:
Address
Six text boxes appear in which you enter the desired MAC address, in hexadecimal
digit form, two characters in each box. You can specify a full 12-hex-digit MAC address
or enter "wildcard" characters for "don't care" digits. Allowable hex-digit characters
are 0-9, a-f, and A-F. Most address-tags and software where you find MAC addresses
listed include colons or dashes to separate the address-pairs; that is provided for you
on the web page, so do not enter the colons or dashes.
The wildcard characters are "x", "X" and blank (space character). Wildcards are useful
when you want to specify all MAC addresses from a given manufacturer. For example,
by specifying only the Organizationally Unique Identifier (the first six hexadecimal
digits of any MAC address from that manufacturer is its OUI) saves you having to enter
all 24 million of them (the table size is limited in the AP/Router to 128 entries). Some
manufacturers produce devices using more than one OUI, in which case you may need
to enter each applicable one.
Name
You may optionally assign a name to a given MAC address. This helps you recognize
known equipment. Names are not used by the router/AP device, they are merely an
aid for recognizing equipment on your network. Names need not be specified and
do not need to be unique. Names are accessible by Service Provider Technical
Support personnel, so if privacy is a concern, you may wish to use generic-sounding
names, such as "Room 1 TV", or not use names at all.
Remove
Check the Remove box for any rows that you no longer want used.
Controlling Access to the Wireless Network
"Changing the Access Controls for a WLAN"
"Changing the Access Controls for a WLAN"
Configuring the Access Point
on page 59.
on page 59.
61