Figure 3-27. Installing The Processor On The Extender Board - HP 9000 rp4410 User's & Service Manual

Figure 3-27 Installing the Processor on the Extender Board
Tightening Sequence for 4-Shoulder
Screws is 1, 2, 3, 4
DO NOT OVERTIGHTEN (See Step 7)
2
Align Pins on
Heatsink with
Slots in
Frame
Chapter 3
3
2 Knurled
Thumb-
1
Screws
4
Slots*
Slots*
Torx-T15
Use Torx T15 Driver
to Tighten Shoulder
Screws and
Thumbscrews
2.5 MM Allen Key
Power Cable Protected by
Plastic Sleeve
*Slots shown are at
CPU1 socket.
Processor shown is
being mounted on
socket CPU0 per load
order.
Installing the System
Installing Additional Components
93