Figure 4-11 Installing Processor On Extender Board Example - HP Integrity rx4640 Operation And Maintenance Manual

Installing Additional Components and Configuring
Installing Processors and Memory
Step 16. If rack mounted, slide the HP Server into the rack until it stops.
Figure 4-11 Installing Processor on Extender Board Example
Tightening sequence for 6-shoulder
screws:
AB371A or AB372A: 1,2,3,4,5,6
AB373A: 3,4,1,2,5,6
DO NOT OVERTIGHTEN!
2
4
1
Shoulder
screws
Align pins on
heatsink with
slots in frame
46
Sequencer
3
6
Slots*
Slots*
5
Power cable protected by
plastic sleeve
Torx-T15
Use supplied
wrench for
tightening shoulder
screws
2.5MM Allen
*Slots shown are
atCPU socket #1 for
clarity
Processor shown is
being mounted on
socket #0 per CPU
load order
Chapter 4