Table 1-2. Control Panel Led Definitions; Figure 1-6. Control Panel Leds And Buttons - HP 9000 rp4410 User's & Service Manual

Overview
Controls, Ports, and LEDs
Figure 1-6 shows the control panel LEDs and buttons.
Figure 1-6 Control Panel LEDs and Buttons
Power LED
Power Button
TOC/NMI Button
Table 1-2 lists the control panel LED status and descriptions.
Table 1-2 Control Panel LED Definitions
LED or
State
Button
System LED Running
System LED Booting
System LED Attention
System LED Fault
System LED Off
Power LED On
Power LED On
Power LED Off
Disk LED
Thermal OK
LED
Thermal Warning
LED
Locator
Button or
LED
26
Flash Rate
Steady Green
Flashing at 0.5 Hz Green
Flashing at 1 Hz Yellow
Flashing at 2 Hz Red
Off N/A
Steady Green
Flashing at 1 Hz Yellow
Off Off
Flashing at rate of Green
disk activity
Steady Green
Flashing at 1 Hz Yellow
Flashing at 1 Hz Blue
System LED
Disk LED
Thermal LED
Locator
Button/LED
Color
System normal, OS up and running.
OS booting or at BCH.
Warning-system needs attention.
Redundancy lost, component failure pending.
Hard fault. system halted.
System off.
Power normal.
Housekeeping voltage present.
Power off.
Disk activity.
Thermal OK.
Thermal warning.
System locator LED can be remotely or
locally activated or deactivated. There is also
a locator button on the rear panel of the
server. Pressing either button turns both
LEDs on or off and enables or disables the
locator function.
Description
Chapter 1