Figure 3-18 System Battery Location On I/O Baseboard - HP 9000 rp4410 User's & Service Manual

Installing the System
Installing Additional Components

Figure 3-18 System Battery Location on I/O Baseboard

Step 5. Lift up the battery holder retaining clip with a flat-head screwdriver and push on the back of the
battery to remove the battery from its socket.
Step 6. Lift up the battery holder retaining clip with a flat-head screwdriver and slide the new battery into
the holder.
NOTE
Step 7. Replace the I/O baseboard assembly. (See "Replacing the I/O Baseboard Assembly" on page 80.)
Step 8. Replace the top cover. (See "Replacing the Top Cover" on page 74.)
82
Battery
The positive terminal of the battery is designated by the plus (+) sign. The battery is
installed with the plus (+) sign facing up.
Chapter 3