Setup Checklist; Table 3-13 Setup Checklist - HP 9000 rp4410 User's & Service Manual

Setup Checklist

Use the checklist in Table 3-13 to assist with the iLO MP setup process.
Table 3-13 Setup Checklist
Step
Standard Setup
1 Preparation
2 Configure the iLO MP LAN
3 Log on to the iLO MP
4 Change default user name and
password
5 Set up user accounts
6 Set up security access
Advanced Setup
1 Activate Advanced Pack Features
Chapter 3
1. Determine a LAN configuration method and assign an
IP address if necessary.
2. Determine an access method to select and connect the
cables.
Choose one of the three methods to configure the LAN for
iLO MP access:
• DHCP with DNS
• ARP Ping
• RS-232 serial port
Log in to the iLO MP from a supported web browser or
command line using the default user name and password.
Change the default user name and password on the
administrator account to your predefined selections.
Set up the user accounts if you are using the local accounts
feature.
Set up the security access settings.
Activate advanced features by entering a license key.
Action
Installing the System
Console Setup
X
119